In order to sync your transmitter, you will need to first make sure that it is properly charged and powered on. Next, you will need to place it into sync mode. Depending on the model of your transmitter, this may involve pressing a button or holding it for several seconds until its LED light starts flashing quickly.
Now you will need to open up the device you are trying to sync it with and search for its Bluetooth menu. Once you are in the Bluetooth menu, you should be able to discover and select the transmitter from the available devices list.
Once the connection is established, the transmitter should be successfully synced with your device.
How do I pair a new transmitter to my Medtronic 770g?
To pair your Medtronic 770g with a new transmitter, the first step is to insert the reservoir into the pump and ensure that the reservoir is fully inserted. Next, attach the transmitter to the reservoir so that it snaps into place.
Press and hold the Cancel button on the 770g for 5 seconds. When the home screen appears, press the Up arrow twice to select Setup and press Select. Select Sensor Setup and press Select. Select Start and press Select.
On the sensor screen, select Use New and press Select. Select the sensor you would like to use and press Select. The system will ask for confirmation. Select Yes and press Select. The system will automatically start the pairing.
Once the pairing is successful, the system will display a confirmation message. Finally, check your insulin delivery settings and prime the infusion set if necessary.
How do I connect my Guardian transmitter to my pump?
The first step in connecting your Guardian transmitter to your pump is to make sure the transmitter is properly configured. To do this, follow the instructions in the user manual. After the transmitter is configured, power it up using the included charger and insert a battery.
Once the battery is inserted, the transmitter must be turned on, the cap removed and the cannula inserted. The cannula must be inserted with the angled tip pointing downward.
Once the cannula is inserted, the cap must be replaced and the transmitter must be turned off. Now, the transmitter and pump can be connected. To do so, you will need to remove the power plug from your pump and plug it into the bottom of the transmitter.
With both ends plugged in, the transmitter must be turned on again.
Next, open the settings window on your pump and select “Connect Guardian” from the menu. This will open a window requesting a code from the transmitter. Take note of this code, as you will need it to connect the transmitter with your pump.
Once the code is noted, select the “Okay” option, go back to the transmitter settings window, and select “Connection code”. The code that you noted will be listed and you will have the option to confirm the connection.
Select the confirmation option, and your Guardian transmitter will be successfully connected to your pump.
Why is my transmitter not pairing?
If your transmitter is not pairing, there are a few different things that could be causing the issue. The first thing to do is to check that the transmitter is powered on and functioning correctly. If it is, then you’ll want to make sure the device that you are attempting to pair with is compatible with the specific model of transmitter.
You’ll also want to check if the transmitter is within the Bluetooth range of the device you’re attempting to pair it with. Additionally, you’ll want to ensure the transmitter’s status LED is illuminated to indicate that it’s in pairing mode.
Finally, you should make sure there is no interference from other electronic devices that could be near the transmitter. If all of these things are in order and you’re still having difficulty pairing the two, then it may be a good idea to try a factory reset on the transmitter.
Why isn t my medtronic sensor connecting?
These reasons include: inadequate signal strength between your pump and sensor, using incompatible technology, and a defective sensor, transmitter, or pump.
First, make sure that you have adequate signal strength between the pump and sensor. The sensors need to be within 6 feet of the pump without any items in between them. If there are objects such as furniture, walls, or other electronic devices, this can interfere with the signal and cause connection issues.
Next, make sure that the technology you are using is compatible with the sensor. Some medical devices, such as insulin pumps and medtronic devices, are not compatible with each other. You should consult the Medtronic product guide for your model to make sure that it is compatible.
Finally, make sure that the sensor, transmitter, and pump are all in good working condition. Check to make sure that all the components are plugged in securely and that the batteries are charged. If any of these items are malfunctioning, it could be the cause of the connection issue.
If all else fails, you may need to contact your local Medtronic representative to troubleshoot the issue further.
How do I link my Medtronic pump to CareLink?
To link your Medtronic pump to CareLink, you’ll need to have a myCareLink Smart monitor, the Medtronic CareLink USB Stick and a compatible Windows or Mac computer. The myCareLink Smart monitor acts as a bridge between your pump and CareLink.
First, connect the myCareLink Smart monitor to the computer using the USB Stick and follow the instructions to install the myCareLink Smart Monitor software. Once the installation is complete, the monitor will search for available wireless networks and you’ll need to select the one your pump is connected to.
Then the myCareLink Smart monitor will attempt to connect to your pump.
After the connection is established, you can use the myCareLink Monitor software to access your pump’s settings and view reports that are updated every five minutes. You’ll also be able to transfer data from your pump to CareLink, allowing you to analyze and monitor your pumping history and performance.
To after confirm a successful connection between your pump and CareLink, you’ll see a green banner at the top of your pump’s home page that says “CareLink Connected”.
With the myCareLink Smart Monitor, you’ll have greater control over your diabetes management and be able to easily connect your Medtronic pump to CareLink.
Can I connect my Medtronic pump to my phone?
Yes, you can connect your Medtronic pump to your phone. This is done via t:connect, a mobile application available for both the Apple and Android devices. When you download the application you can connect your pump and track your data, review reports, and share your information with your healthcare team.
The application also allows you to configure settings on your pump, set alarms and reminders, adjust basal rates, and set insulin sensitivity factors. Once your device is connected, you can view trends, manage bolus and basal delivery, and keep track of carb ratios, bolus and basal amounts.
With the advanced features, you can also adjust settings by test results or target glucose levels, and access a variety of reports and charts directly from your phone.