It took several years to construct the Death Star, likely several decades. Even after Emperor Palpatine issued the directive for its construction, it took some time for the top-secret plans to reach the headquarters of the Imperial Military and to be fleshed out.
According to the Imperial Code Cipher, the design-specification plans for the first Death Star were above Top Secret, and the plans were kept at the highest level of security, only accessible to the highest ranking officers.
The construction of the first Death Star began shortly after the plans were delivered in 19 BBY, after the Battle of Geonosis.
Construction of the original Death Star was expected to take 20 years. The immense size of the battle station meant that hundreds of thousands of complex pieces had to be individually designed and assembled—a feat that only a large-scale empire such as the Galactic Empire was capable of.
By the time the schematics for the first Death Star were presented, Emperor Palpatine had already begun the process to form the second Death Star. Even Palpatine had not expected with the completion of the first Death Star to take as long as it did.
The first Death Star was finally completed in 0 BBY, well past the estimated completion date. The original Death Star seemed almost ready to enter service in 1 BBY, but due to political reasoning, the official dedication of the battle station didn’t occur until the Battle of Yavin.
The construction of a second Death Star at the forest moon of Endor began shortly after the completion of the first. Construction started in 0 BBY and finished in 4 ABY. Here again the size of the Death Star and its complexities meant that construction would take considerable time.
Under the direction of Grand Admiral Ulrich and with the support of the Emperor, the second Death Star was fully operational in 4 ABY, in time to provide the means of Palpatine’s ultimate victory and his ultimate demise.
How did they build Death Star 2 so quickly?
The building of Death Star II was made possible due to a remarkable engineering feat. The construction process was greatly streamlined by utilizing a large number of factory-style robotic construction arms and computer-guided assembly systems.
These advancements allowed for unprecedented precision and speed in the construction of the station.
Not only did these technologies make the installation of individual parts and components much faster, but also machines took over much of the labor-intensive tasks that would have been necessary with manual assembly.
These machines could precisely forge and shape pieces of the station with great efficiency, while also eliminating the need for manual labor.
Additionally, the Empire had access to a vast network of automated supply units and workers located across the galaxy that allowed for shortened waiting times for materials and personnel. This access to resources allowed them to quickly build the station with no delays or interruptions.
Furthermore, the Empire had access to factory-assembled prefabricated parts that could be linked together and installed in much less time than building each part from scratch. This shortened the construction time significantly and allowed for much faster assembly of the station.
Overall, the Empire’s technological advances and access to resources enabled them to quickly build Death Star II, a process that would have taken centuries with more primitive technologies.
When did construction start on the second Death Star?
Construction on the second Death Star began during the period between the Battle of Yavin and the Battle of Hoth, roughly four years after the Empire seized control of the galaxy. Construction was overseen by the Moff of the planet Sullust, with assistance from the planet Despayre.
The Galactic Empire had ambitious plans for the new Death Star to be completed by 0 ABY. However, due to the tremendous size, volume and complexity of the construction, the projects took much longer than expected.
Ultimately, the second Death Star was not completed until 4 ABY, about the time of the Battle of Endor. The battle ended with the destruction of the Death Star, shortly after the station was activated.
Who built the second Death Star?
The second Death Star was built by the Galactic Empire during the Galactic Civil War. It was the successor to the first Death Star and was built in the Endor system, under the direct supervision of Emperor Palpatine with Darth Vader playing a major role in its creation.
It was constructed in much the same way as the first Death Star, but was larger and had double the firepower. The process was said to have taken up to twenty years. Skilled laborers and slaves from across the galaxy were used to construct the space station, and raw materials such as Tibanna gas were transported in from Bespin.
Construction was completed shortly before the Battle of Endor, making the Death Star fully operational. However, the station was destroyed shortly after the battle by Lando Calrissian, who had infiltrated the outpost with Rebel forces.
What is the Death Star 2 weakness?
The Death Star 2, otherwise known as the “second Death Star,” was an Imperial battlestation constructed by the Galactic Empire during the Galactic Civil War. Its primary purpose was to be a weapon capable of destroying entire planets.
However, like its predecessor, the Death Star 2 had a distinct weakness. This weakness was a small exhaust port located at the bottom of the station that could only be accessed by precise targeting. This weakness meant that if a pilot was able to make a precise shot at this port with a proton torpedo, it could cause a chain reaction that would destroy the entire station.
In addition to this weakness, the Death Star 2 was incomplete when it was destroyed. It had not been fully armed and the station was vulnerable to attack in other areas. For example, the main reactor core of the station was not shielded, which allowed for it to be destroyed from within by a Rebel strike team.
Overall, the Death Star 2’s primary weakness was its exhaust port, as well as its incomplete status. These weaknesses allowed for the station to be destroyed in a matter of moments, thus ending the Galactic Civil War.
Was there a third Death Star?
No, there was not a third Death Star. The second Death Star was destroyed by the Alliance Fleet at the Battle of Endor during the Galactic Civil War in Return of the Jedi. Although plans for a third, more powerful Death Star – the “Death Star III” – were considered, this idea was abandoned due to budget constraints and the fact that Emperor Palpatine had already died.
Moreover, the Death Stars were so destructive and costly to build that the Galactic Empire had shifted its efforts to other combat-related projects such as the TIE Defender, which consisted of far more starfighters than the previous TIE models.
In the years following the Battle of Endor, it seemed the idea of the Death Star had been completely forgotten in favor of these new advances in space warfare.
Why was Death Star 2 half built?
Death Star 2 was half built because its construction was originally delayed due to an internal power struggle within the Galactic Empire. Emperor Palpatine made his adviser, Grand Moff Tarkin, governor of the Outer Rim Territories, which put Tarkin in control of the bulk of the Empire’s military forces and the resources of the outer worlds.
Tarkin decided to prioritize the construction of the first Death Star over the second, meaning the second would have to wait. Eventually, the second Death Star’s construction was green-lighted and funded by the Emperor himself, but only after the fall of Alderaan and the first Death Star’s destruction.
Local Imperials in the Outer Rim Territories were overburdened with other construction projects, such as the Imperial Armory Complex and the construction of Tarkin’s own personal fortress. This diverted resources from the Death Star II project and caused it to be delayed.
At the time of the Battle of Endor, the station was still only half completed and in need of additional material, power and manpower. Consequently, its notorious superlaser was not yet operational. The project was eventually finished shortly after the Battle of Endor, but was destroyed by the New Republic shortly thereafter.
What is the difference between Death Star 1 and 2?
The Death Star is a space station and superweapon designed by the Empire in the Star Wars universe. There were two versions of the weapon: the first was featured prominently in Star Wars Episode IV: A New Hope and was destroyed when Luke Skywalker used the Force to launch proton torpedoes into the station’s main reactor.
The second Death Star, which was substantially larger and more powerful than the first, made its first appearance in Star Wars Episode VI: Return of the Jedi. This version of the Death Star was destroyed when the rebel Alliance used lightspeed maneuvers to create a chain reaction in the station’s core.
The Death Star 1 was described by Obi-Wan Kenobi as being “the size of a small moon,” and was capable of destroying planets with its powerful superlaser. It was also equipped with an advanced internal defense system, which included TIE fighter squadrons, laser turrets and an advanced communications array.
The Death Star 2 was an improved and more powerful version of the first Death Star. This version was about 900 meters larger than its predecessor and had a more powerful version of the superlaser. The station also had improved internal defenses, including faster, more maneuverable TIE fighter squadrons, as well as additional laser turrets and ion cannons.
Its only weak link was a flaw in the engineering that allowed a small Rebel Alliance ship to enter the station’s core.