In CB talk, the phrase 10-10 is often used to indicate the end of communication or conversation. This phrase is part of a standardized set of codes and jargon that is used by CB radio operators for communication purposes. CB radio operators use this code to indicate that they have no further transmission to make and are ready to end the current conversation.
The phrase “10-10” is just one of many codes used by CB radio operators. These codes can be used for a variety of purposes. For example, 10-1 is used to indicate that a signal is weak or difficult to understand. Similarly, 10-4 means “message received” or “affirmative,” while 10-20 is used to indicate a location or position.
The reason for using these codes is to simplify communication and reduce misunderstandings. Since CB radio signals can be prone to interference and noise, using a standardized set of codes helps to ensure that messages are conveyed accurately and efficiently. Additionally, CB radio operators often use these codes to convey information without alerting others to their conversation or broadcasting sensitive information over the airwaves.
10-10 is a common code used in CB talk to indicate the end of communication. This code is just one of many that have been developed for communication purposes in order to simplify and streamline communication among CB radio operators.
Why do truckers say Breaker 19?
Truck drivers say “Breaker 19” as a common phrase used in Citizen’s Band (CB) radio communication. CB radio was popular among truck drivers to communicate with each other during long haul journeys on highways, as it allowed them to stay connected without using expensive communication devices.
“Breaker 19” is actually a combination of two different codes – “Breaker” and “19”. ‘Breaker’ is a colloquial term used in CB radio communication, usually before starting a conversation or interrupting ongoing communication. It is a way of getting attention, much like saying “Excuse me”.
On the other hand, ’19’ refers to channel 19 on the CB radio, which is the primary channel for truckers to communicate on. The reason for choosing channel 19 as the go-to channel for truckers is because it is a dedicated highway channel that is not used by emergency services or other professions.
Truckers use “Breaker 19” as a way to break into the ongoing communication on channel 19 to get noticed and initiate a conversation with other truckers who might be listening in. It has become a common phrase among truckers as it helps them to communicate with each other, share information about road conditions, traffic congestion, and any other critical updates about their journey that may be beneficial to other truckers sharing the same highway.
“Breaker 19” is used by truckers to make communication easier and faster while driving long haul journeys. It is an integral part of the CB radio communication protocol that helps to keep the trucking community connected and informed about important updates on the road.
What is CB code 10 21?
CB code 10 21 is a commonly used phrase amongst citizens band (CB) radio users that has a specific meaning. CB codes are a series of standardized phrases used by CB radio operators for communication purposes, and 10 codes are some of the most widely used CB codes. CB code 10 21 specifically refers to a request to make a phone call.
When a CB radio user says “10 21” on the air, it means that the user wishes to speak with someone over the phone. The code is often used in situations where a person needs to communicate something that is too sensitive, private or lengthy to be discussed over the CB radio. For instance, a truck driver might use CB code 10 21 to ask the dispatch office to call them on their mobile phone to give them specific instructions or important information.
While CB code 10 21 is a standardized CB phrase, some users may choose to use a slightly different code to convey the same message. However, using standardized codes is preferable to ensure clear communication and avoid confusion amongst CB radio users. The widespread use of these codes makes communication over CB radio more efficient and effective, allowing users to transmit messages quickly and reliably without misinterpretation.
Cb code 10 21 is a standardized phrase used by CB radio users to request that someone contact them over the phone. It is an important code for clear and efficient communication over a CB radio, and it helps to reduce confusion and misunderstandings between users.
What are the CB 10 codes?
The CB 10 codes are essentially a set of codes used in Citizen’s Band (CB) radio communication. These codes are used as shorthand to transmit and receive information more quickly and effectively between CB radio users. The CB 10 codes were developed to aid in communication for various purposes such as emergency responses, road safety, law enforcement, and general conversation.
The CB 10 codes are abbreviated phrases or commands numbered between 0 to 37, and typically start with the numbers 10. For example, 10-4 means “OK, message received” or “I understand”. Commonly used codes include 10-7 for “out of service” or 10-20 for “location”. The codes help in transmitting information quickly, clearly, and concisely, especially during emergencies when rapid response is essential.
CB radio users have widely adopted the CB 10 codes, although some regional variations may exist. As such, the codes can be a valuable tool in CB radio communication, especially in situations where more extensive conversations are not practical. However, it is important to note that the 10 codes do not replace the regular language, but merely complement it.
Therefore, it is essential to use them correctly and in context to avoid any misunderstandings.
The CB 10 codes are a standardized language used by CB radio users to communicate more efficiently. They are essential in transmitting information quickly and accurately, especially during emergencies, and help to avoid long and complicated conversations. Knowing and understanding the CB 10 codes can make communication more effective and enhance safety and situational awareness for all users.
What is a 10 100 security code?
A 10 100 security code is an access code used in certain security systems. It is called a 10 100 code because the code consists of ten digits where the first three digits represent the user’s access level, and the remaining seven digits represent the unique identifier assigned to each user.
The 10 100 security code is used to restrict access to certain areas or equipment by limiting access to only those individuals with a valid security code. These security codes can be assigned to employees, contractors, or other individuals who require access to restricted areas or equipment.
The security code’s first three digits are used to define the user’s access level. The access levels are generally set up in a hierarchy, with higher access levels granted to those who require access to more restricted areas or equipment. For example, a security guard may have an access level of 100, while a manager or supervisor may have an access level of 200 or higher.
The remaining seven digits of the 10 100 security code serve as a unique identifier for each user. This unique identifier ensures that only authorized individuals are granted access to restricted areas or equipment. When an individual enters their security code, it is checked against the system’s database to determine if they have the appropriate access level and unique identifier for the area or equipment they are attempting to access.
The 10 100 security code is an effective way to control access to restricted areas or equipment within a facility, ensuring that only authorized individuals are granted access. It provides an added layer of security, preventing unauthorized access and promoting the safety and security of employees and assets.
What is the response for 10-4?
The response for 10-4 is typically used in radio communication to mean “message received and understood.” It originated from the police radio code 10, which was created in the United States in the 1930s to establish standardized language in radio communication. 10-4 specifically refers to the code for “acknowledgment” or “affirmative,” indicating that the speaker has received the message and understands it.
The use of radio communication has been essential in many industries, including law enforcement, emergency services, transportation, and aviation. The establishment of radio codes, such as 10-4, has enabled quick and efficient communication by using concise and clear messages. This ensures that there is no room for confusion or misunderstanding in time-critical situations.
Although the use of radio codes has waned in recent years with the widespread use of mobile phones and digital communication, 10-4 remains a popular phrase used in everyday conversation. It has become a part of popular culture, often appearing in movies and TV shows. Many people also use it in informal settings, such as texting or social media, to indicate that they have received and understood a message.
The response for 10-4 is a universal code that means “message received and understood,” originating from police radio codes. It has played a crucial role in radio communication since its creation in the 1930s and remains a part of popular culture and everyday conversations today.